Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Silver Spring Homeowners
A broken spring stops your day. The door won’t lift, or it slams down hard, and your garage goes from everyday entry point to a heavy slab of steel you can’t safely open. We handle garage door spring repair in Silver Spring with a focus on getting the door working again the same day whenever the parts and access allow. Our technicians have up to 8 years of experience and know the torsion and extension systems common on homes around Four Corners, Forest Glen and Morningside. Springs are the most dangerous part of the door to touch, so this isn’t a job to improvise. Call (877) 357-8434. We answer 24/7, with fast dispatch from 7am to 7pm.
What Our Garage Door Spring Repair Service Includes
Spring work covers more than swapping a coil. Here’s what each part of the job involves and when it comes up.
Torsion Spring Replacement
A torsion spring is the coiled spring mounted on the shaft above your door, and it does most of the lifting. When it snaps, the door becomes dead weight and the opener strains against something it wasn’t designed to carry. We replace torsion springs sized to your door’s weight, then balance the door so it holds position by hand.

Extension Spring Replacement
Extension springs run along the horizontal tracks on either side and stretch as the door closes. Older Silver Spring homes often still have them, and they’re the type that can fly loose if a safety cable isn’t in place. We replace them in matched pairs and confirm the cables and pulleys are sound before the door goes back into service.

Broken Spring Repair
Most broken springs announce themselves with a loud bang from the garage, and the door won’t open the next morning. We confirm which spring failed, check that the other one isn’t close behind, and replace what’s needed rather than patching a single coil on a tired pair. The goal is a door that lifts smoothly and stays put.

Spring Adjustment
Sometimes the spring isn’t broken, just out of balance, and the door feels heavy or drifts down on its own. Adjustment means setting the tension so the door moves evenly and the opener isn’t doing extra work. We test the balance by hand before and after so you can feel the difference.
Safety Cable Installation
Safety cables run through the center of extension springs and keep the spring contained if it breaks. On older doors they’re sometimes missing or rusted through. We fit new cables so a failure stays where it belongs instead of becoming a projectile. This is cheap insurance on a system that carries a lot of stored energy.
Spring Inspection
A spring can be close to failing long before it snaps, showing gaps, rust or a stretched coil. An inspection checks spring condition, cable wear, and how the door balances on its tracks. If the springs have life left, we say so. If they don’t, you’ll know before the door leaves you stuck.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We work on the brand you already have. A Clopay door and a Wayne Dalton door can carry different spring setups and door weights, and knowing the difference saves time on your driveway. Our technicians are factory-familiar with Clopay’s residential lines and with the torsion systems common on Wayne Dalton doors, so the repair starts from a place of recognition rather than guesswork.
The same goes for the door and opener brands installed across Silver Spring. We service Amarr doors and Genie openers and understand where each tends to wear. When the spring is fixed, the opener has to be checked too, since a strained opener often shows its damage after a spring failure. Whether you have Amarr, Genie, or any other make, we can help.
Signs You Need Garage Door Spring Repair Right Now
- A loud bang from the garage. That crack is often a torsion spring snapping under tension. The door may still be shut, but it’s now unsupported and shouldn’t be forced open.
- The door feels extremely heavy. If lifting the door by hand takes real effort, the spring isn’t carrying its share of the weight. That strain also wears out your opener faster.
- The door won’t stay up when partly open. A balanced door holds position a few feet off the ground. One that drops on its own has a tension problem that needs attention.
- A visible gap in the spring coil. A clean break in the coil is a failed spring, even if the door still opens a little. Don’t run the opener on it.
- The door opens crooked or jerks. Uneven travel can point to one spring doing more work than the other. Left alone, the weaker spring usually fails next.
Our Garage Door Spring Repair Process – Step by Step
- 1
We talk it through on the phone. You describe what the door is doing, and we get the make, model and door type where you know it. That tells us what to expect before anyone arrives and helps us bring the right springs.
- 2
We inspect the whole system. On site, we check the springs, cables, drums, rollers and the opener’s response. A caliper reading on the wire gauge and a check of the door’s weight confirm the right spring size, not a guess from looking.
- 3
We give you a written estimate before any work starts. The price is quoted and agreed up front. If we find a second problem, we explain it and you decide before we touch it.
- 4
We do the repair safely. Springs are wound under controlled tension with the right winding bars, and the door is secured throughout. This is the part of the job where experience matters most, and it’s why we don’t hand homeowners a how-to.
- 5
We test and balance the door. Before we leave, the door is cycled several times, checked for balance and smooth travel, and the opener is tested against the new spring tension. You see it working before we go.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Silver Spring?
Spring repair in Silver Spring typically runs $180 – $340 for one spring, depending on the spring type, the door’s weight and how accessible the hardware is. A matched pair is usually replaced together, so a pair costs about twice that range. Cable repair, if a frayed cable turns up alongside the spring, is a separate line and typically runs $130 – $250.
- Torsion spring replacement: $180 – $340 per spring.
- Extension spring replacement: $180 – $340 per spring.
- Cable repair when needed: $130 – $250.
- Opener repair if the opener was strained: $120 – $320.
What affects the price: the number of springs, whether they’re torsion or extension, the door’s size and weight, and whether related parts like cables or rollers need replacing at the same time. You avoid overpaying by getting the estimate in writing before work starts and by asking whether the springs are being replaced as a pair, since that’s usually the smarter call.
Your free estimate covers the inspection, the diagnosis and the written price. The written estimate sets the final price, so there are no surprises once the work is done. Call (877) 357-8434 for an exact quote.
Garage Door Spring Repair Near Silver Spring – Our Service Area
We connect homeowners with local professionals across Silver Spring and the surrounding communities, including University Park, Somerset, Cottage City, Edmonston, Colmar Manor, Landover Hills, Fairmount Heights, Cedar Heights, Morningside and Four Corners. Response times depend on your location and the day’s schedule, and spring failures usually get same-day attention when the right parts are on hand. If you’re nearby and need garage door spring repair, call and we’ll confirm the soonest opening.
Serving Silver Spring, MD – Our Local Coverage Area
We serve Silver Spring and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Silver Spring
Garage door spring repair is the replacement, adjustment or inspection of the springs that counterbalance your door’s weight. Torsion springs sit above the door on a shaft, and extension springs run along the side tracks. Either type can snap, lose tension or wear out, and the repair restores the door’s balance so the opener and door work together safely.
Most single-spring replacements take about an hour to ninety minutes once we’re on site. A matched pair, plus a check of the cables and opener, usually runs a bit longer. The exact time depends on the spring type, the door’s condition and whether related parts need attention.
Typical spring repair in Silver Spring runs $180 – $340 for one spring, and about twice that for a matched pair. Cable repair, if needed, is a separate line at $130 – $250. The written estimate you get before work starts sets the final price. Call (877) 357-8434 for an exact quote – estimates are free.
Yes. We work on Genie and Clopay equipment, along with Amarr, Wayne Dalton, LiftMaster, Chamberlain, Craftsman and Raynor. Knowing the brand tells our technicians where that system tends to wear, so the repair starts from recognition rather than trial and error. Whether you have Genie, Clopay or another make, we can help.
Same-day spring repair is often possible in Silver Spring, depending on parts and scheduling. We answer 24/7, and we dispatch Sunday through Friday, 7am to 7pm. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Warranty terms depend on the parts and the specific job, and we’ll explain exactly what’s covered in your written estimate before you commit. Ask about it when you call so you know what to expect. We’d rather spell it out up front than leave you guessing later.
Clear the area under and around the door so the technician has room to work, and keep cars out of the garage if you can. Don’t try to force the door open or run the opener on a broken spring. Have your door and opener brand handy if you know it, and call (877) 357-8434 to book.
Schedule Your Garage Door Spring Repair Service in Silver Spring Today
Don’t leave a broken spring holding your garage hostage. We handle garage door spring repair across Silver Spring, from torsion and extension replacement to safety cables and inspections, and we can work with your insurer if a failure causes damage. Call (877) 357-8434 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts.
Written by the team at Silver Spring Garage Door Repair.